...

The best tools on the market for electricians

Vicera’s goal is to bring new tool innovations to the market so working would be more ergonomic, efficient, and higher quality. The tools and equipment are designed together with professionals in the field, so the result would serve as many professionals as possible in all conditions.

The most popular
products

Cable sanding tool CST M

Vicera’s CST-sanding machine is designed especially for cross-linked polyethylene (XLPE) and rubber insulation sanding and polishing. It can used to smooth the transition of the insulation and semiconducting insulation screen as well (for the final insulation surface use always clean sanding belt). CST M can also be used for sanding other materials, such as metal pipes.

With CST sanding machine you can deliver the job 10 times faster than by hands with better surface smoothness. Tool is completely safe and less physically demanding when used in appropriate way.

CST sanding machine has 10 mm attachment shaft for the electric drills adjustable socket.Sanding belts also available from Vicera. Belts are especially suitable for sanding MV and HV voltage cables with highest quality. If you need other grain sanding belts, please contact to info@vicera.fi.

Length                       300 mm
Width                         180 mm
Height                        130 mm
Weight                       0,985 kg
Max Cable Ø             80 mm

Product code:          64 136 12

Sanding belts:

CST M P240   20pcs/pkg  64 136 13
CST M P320   20pcs/pkg  64 136 14
CST M P400   20pcs/pkg  64 136 15
CST M P240 100pcs/pkg  64 136 16
CST M P320 100pcs/pkg  64 136 17
CST M P400 100pcs/pkg  64 136 18
CST M P180   20pcs/pkg  64 136 19
CST M P180 100pcs/pkg  64 136 20

Cable joint stand APU2.0

Vicera’s APU2.0 cable joint stand was developed together with experienced cable jointers for the installations of MV and HV cable joints and terminations. With APU2.0 work is easier, more ergonomic, and efficient to deliver. Based on significant experiences and feedback from the field, jointers rely on this to achieve higher quality of installations.

Each cable clamp of the APU2.0 cable joint stand can be adjusted to its own desired position. Cable clamps have stepless adjustment in the lateral and tilt angle directions. Even if the cable comes from the ground vertically, it is possible to attach in APU2.0 cable clamp. The height adjustment is very wide.  

Cables can be attached to APU2.0 very close to the ground with an installation height of 20 cm and maximum height is 145 cm. Legs has as well multiple adjustment options and thus, it can be used in almost all kinds of joint bays. Legs can be adjusted in 180 degrees angle to place it on a cable trench. The clamps are designed to fit any MV and HV cable from 18 mm to 90 mm in outer diameter.

APU2.0 is a great “jointer mate” from the worst joint bay to the substation environment. It is used by several accessory manufacturers in trainings and demos as well!

Length                  180 mm
Width                    730 mm
Max height           1300 mm
Min height            300 mm
Weight                  17 kg
Cable Ø                 18-90 mm

Product code:     64 136 11

Patent Pending.

Cable reel roller PyA-Multi

A universal multipurpose spinning platform for reels, damaged reels, cable bundles, flexible plastic pipes and everything you can fit on it.

The PyA-Multi can be adjusted up to a diameter of 90 cm bundles or reels. Works for unwinding and rewinding so you can also make cable bundles or pipe bundles.

Pulling the cable from the cable reels and bundles is effortless thanks to the special geometry of the port part. You can support the pipe and cable bundles from the inside with adjustable vertical rods.

Easy to use, compact and light to carry around.

Length                        400 mm
Width                          400 mm
Height                         130 mm
Weight                         5,8 kg
Carrying capacity      80 kg

Reel or bundle max diameter 900 mm

Adjustable for different size of reels and bundles 

Product code: 64 136 22

The video is not yet available.

Cable Heating blanket

The highest quality heating blankets on the market for high voltage cables. These blankets are precisely designed to achieve the best and safest work result.

The heating blankets are made for operating temperatures of around 90 degrees, but they can be set to heat and hold any temperature between 0 and 90 degrees.

Heating blankets can also be ordered customized for any diameter and in different lengths.

In the standard size, the diameter is adjusted between 60-160 mm and the length is 1 or 2 meters.

The outer surface of the heating blankets is insulated and they are designed to give ~1400 W/m² power when heating the cable.

Working temperature

0-90 °C (+/- 5 °C)

IP-rating

IP55

Environment

-10–40 °C

Voltage

230V

Power          

750W / 1500W

Material

Silicone impregnated cloth and 6 mm fiberglass insulation.

Fastening method

Velcro straps.

Safety

-Rugged high temperature materials.

-PT100 primary sensor.

-Bi metal safety thermostat at 100°C.

-Thermal fuse 167 °C.

-Current fuse 16A.

-Electrical protection class II.

Dimensions

Cable Ø        60–160mm

Length          1 or 2 m

Width:           625 mm

Thickness:    8 mm

Part numbers

Controller

19-2674HVC

750W heating blanket

1 meter 20-2851

1500W heating blanket

2 meters 18-2573

The video is not yet available.

Product
categories

Vicera’s own products

Energy production and electrical grids

Telecommunication networks

Suppliers Catalogs

Laadukkaat Työkalut Sähköasentajille | Kuvake | Vicera Oy

Quality
Products

Laadukkaat Työkalut Sähköasentajille | Kuvake | Vicera Oy

Extensive
product selection

Laadukkaat Työkalut Sähköasentajille | Kuvake | Vicera Oy

Competitive
prices

Laadukkaat Työkalut Sähköasentajille | Kuvake | Vicera Oy

Personalized customer service

From electrician to electricians to achieve the best work results!

Vicera’s goal is to bring new tool innovations to the market so working would be more ergonomic, efficient, and higher quality. The tools and equipment are designed together with professionals in the field, so the result would serve as many professionals as possible in all conditions.

We want to develop along with the constantly changing and developing world. Contact us if the tools on the market do not work optimally for your work. Let’s develop better together!

Contact us, we will answer all questions.

Do not hesitate to contact us. Fill out the attached contact form, call us or send an e-mail, and we will answer you as soon as possible.

Make an
enquiry