...

Vicera's own
products

Cable joint stand APU2.0

Vicera’s APU2.0 cable joint stand was developed together with experienced cable jointers for the installations of MV and HV cable joints and terminations. With APU2.0 work is easier, more ergonomic, and efficient to deliver. Based on significant experiences and feedback from the field, jointers rely on this to achieve higher quality of installations.

Each cable clamp of the APU2.0 cable joint stand can be adjusted to its own desired position. Cable clamps have stepless adjustment in the lateral and tilt angle directions. Even if the cable comes from the ground vertically, it is possible to attach in APU2.0 cable clamp. The height adjustment is very wide.  

Cables can be attached to APU2.0 very close to the ground with an installation height of 20 cm and maximum height is 145 cm. Legs has as well multiple adjustment options and thus, it can be used in almost all kinds of joint bays. Legs can be adjusted in 180 degrees angle to place it on a cable trench. The clamps are designed to fit any MV and HV cable from 18 mm to 90 mm in outer diameter.

APU2.0 is a great “jointer mate” from the worst joint bay to the substation environment. It is used by several accessory manufacturers in trainings and demos as well!

Length                  180 mm
Width                    730 mm
Max height           1300 mm
Min height            300 mm
Weight                  17 kg
Cable Ø                 18-90 mm

Product code:     64 136 11

Patent Pending.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable sanding tool CST M

Vicera’s CST-sanding machine is designed especially for cross-linked polyethylene (XLPE) and rubber insulation sanding and polishing. It can used to smooth the transition of the insulation and semiconducting insulation screen as well (for the final insulation surface use always clean sanding belt). CST M can also be used for sanding other materials, such as metal pipes.

With CST sanding machine you can deliver the job 10 times faster than by hands with better surface smoothness. Tool is completely safe and less physically demanding when used in appropriate way.

CST sanding machine has 10 mm attachment shaft for the electric drills adjustable socket.Sanding belts also available from Vicera. Belts are especially suitable for sanding MV and HV voltage cables with highest quality. If you need other grain sanding belts, please contact to info@vicera.fi.

Length                       300 mm
Width                         180 mm
Height                        130 mm
Weight                       0,985 kg
Max Cable Ø             80 mm

Product code:          64 136 12

Sanding belts:

CST M P240   20pcs/pkg  64 136 13
CST M P320   20pcs/pkg  64 136 14
CST M P400   20pcs/pkg  64 136 15
CST M P240 100pcs/pkg  64 136 16
CST M P320 100pcs/pkg  64 136 17
CST M P400 100pcs/pkg  64 136 18
CST M P180   20pcs/pkg  64 136 19
CST M P180 100pcs/pkg  64 136 20

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable joint stand APU0.5

Aluminum stand for installation of medium voltage cables.

The stand has extensive adjustment options. The ends have pins that prevent the cables from falling sideways. Stepless width adjustment.

Height adjustment with cotter pins. The legs of the stand can be placed in the transport position, so it can fit in a small space. Weighs less than 3 kg and has a load capacity of more than 90 kg.

The height of the horizontal tube can be adjusted between 75 and 640 mm

The width is adjustable between 510 and 770 mm.

Length                770 mm
Width                  510 mm
Height                 640 mm
Weight                2,8 kg
Load capacity   +90kg

Product code:   64 136 21

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable reel roller PyA-Multi

A universal multipurpose spinning platform for reels, damaged reels, cable bundles, flexible plastic pipes and everything you can fit on it.

The PyA-Multi can be adjusted up to a diameter of 90 cm bundles or reels. Works for unwinding and rewinding so you can also make cable bundles or pipe bundles.

Pulling the cable from the cable reels and bundles is effortless thanks to the special geometry of the port part. You can support the pipe and cable bundles from the inside with adjustable vertical rods.

Easy to use, compact and light to carry around.

Length                        400 mm
Width                          400 mm
Height                         130 mm
Weight                         5,8 kg
Carrying capacity      80 kg

Reel or bundle max diameter 900 mm

Adjustable for different size of reels and bundles 

Product code: 64 136 22

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable sheat spreader VRSJ

Sheath spreader for twisting the outer sheath of high-voltage cables out of place. The weight of the sheat spreader is just right to handle, and there is enough lever arm for twisting. The sheath spreader has a comfortable rubber handle.

We recommend two sheath spreaders for working.

Width         145 mm
Length       430 mm
Height       25 mm
Weight      0,75 kg

Product code: 64 136 09

The brochure is not yet available.

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Billhook knife BHK

A high-quality and multipurpose knife for electrical and network installers. The knife is a folding model, so the blade stays good and the knife fits well in the pocket. Durable and sharp blade that is lockable. Nicely shaped handle.

Width       50 mm
Length     110 mm
Height     20 mm
Weight      0,05 kg

Product code: 64 136 10

The brochure is not yet available.

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable pliers KNP

Cable pliers for moving and handling heavy cables. With these, you can move heavy high-voltage cables on the ground while standing with your back straight and without tangling your hands.

Width             350 mm
Length           850 mm
Height            50 mm
Weight           3,7 kg
Max cable Ø  125 mm

Product code: 64 136 06

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable cart KK-2K6

Easy-to-use cable reel cart that can accommodate up to two K6 cable reels. The cart functions as a reel stand and a means for moving the reels. With the KK-2K6 cable reel cart, you can work faster and more ergonomically.

Each reel has its own axle, making it easy and effortless to load the reels onto the cart. The cart features dedicated attachments for the axel tubes, ensuring they remain securely in place even when the cart is moved empty.

The cable reel cart is equipped with durable, ball-bearing, solid rubber wheels with a 20 mm axle.

Width                            750 mm
Depth                            570 mm
Height                           1450 mm
Weight                          19,5 kg
Carrying capacity       260 kg
Reel max. width          490 mm
Reel max. diameter   600 mm
Reel axel Ø                  38 mm

Product code: 64 136 00

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable reel roller RA500

A handy rolling platform designed to accommodate a K6 cable reel. By placing two platforms side by side, it can support even a K9 reel. Lightweight and easily portable, it is constructed for robustness despite its lightness. Equipped with durable rubber feet, the rollers have guide flaps to ensure the reel stays securely on the platform.

The adjustment of the distance between the rollers is easily and quickly done with a sliding mechanism, eliminating the need for tools thanks to wing screws. This allows for immediate adjustment of the roller distance when changing reels.

Installers no longer need to carry platforms of different sizes or search for tools to adjust roller distances when the reel size changes. Steps are reduced, and time is saved.

Width                         620 mm
Length                       500 mm
Height                        100 mm
Weight                       10,5 kg
Carrying capacity    300 kg
Reel max. width        485 mm
Reel min. diameter  200 mm

Product code: 64 136 01

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Cable reel roller RA600

A convenient rolling platform designed to accommodate a K8 cable reel. By placing two platforms side by side, it can support even a K9 reel. Lightweight and easily portable, it is constructed for robustness despite its lightness. Equipped with durable rubber feet, the rollers have guide flaps to ensure the reel stays securely on the platform.

The adjustment of the distance between the rollers is easily and quickly done with a sliding mechanism, eliminating the need for tools thanks to wing screws. This allows for immediate adjustment of the roller distance when changing reels.

Installers no longer need to carry platforms of different sizes or search for tools to adjust roller distances when the reel size changes. Steps are reduced, and time is saved.

Width                          750 mm
Length                        500 mm
Height                         100 mm
Weight                        12.2 kg
Carrying capacity    300 kg
Reel max. width        600 mm
Reel min. diameter  200 mm

Product code: 64 136 05

The video is not yet available.

This product is available through our distributors. Click the 'Distributors' button to learn more about our distributors.

Contact us, we will answer all questions.

Do not hesitate to contact us. Fill out the attached contact form, call us or send an e-mail, and we will answer you as soon as possible.

Make an
enquiry